The majority of quantum computers at the moment operate in accordance to the gate-based model. The gate-based model includes a universal set of gates, with the most common one employing only single- and two-qubit gate operations. Such quantum devices face difficulties in controlling all relevant degrees of freedom as the system is scaled up, due to both current hardware limitations and software challenges. Despite taking advantage of techniques like error correcting codes and optimization protocols, associated gate errors pose significant limitations, mainly due to hardware imperfections. A typical example where such scaling limitations are evident is the simulation of the Fermi-Hubbard model using conventional quantum computers, which is a simulation that is only possible for small systems with a limited number of fermionic lattice sites. To overcome this, alternative approaches which are not based on the execution of the standard two-qubit gates can be exploited.
One such alternative that is proposed in this work is hybrid digital-analog quantum computing. Here, single-qubit gates as well as individual readouts of qubits are accessible similarly to the case of gate-based model. However, in the case considered in this paper, quantum entanglement is created using always-on native interaction of qubits.
The always-on interaction between qubits diminishes the fidelity of single-qubit gates, but creates the entanglement that would otherwise require two-qubit gates. Therefore, a certain trade-off between the two should be found. A proposition to overcome this limitation, is to have a switchable interaction between qubits that can be turned off during the execution of single-qubit gates. In this paper, the authors analyze a digital-analog approach based on the fermionic SWAP network and refocusing technique, to simulate the dynamics of fermionic systems, in particular the Fermi-Hubbard model.
Firstly, a two-qubit fermionic simulation gate is parameterized by the Hamiltonian constants. The key idea is based on changing the qubit numbering in the Jordan-Wigner transformation on the fly and combining it with the evolution operator, to create such a two-qubit gate. This gate is used to circumvent difficulties associated with the mismatch between the fermion statistics of the simulated system and Pauli statistics relevant for qubits. After establishing a fermionic SWAP network, refocusing techniques are implemented to disable the interaction between certain qubits. This refocusing operation is based on a partition of the total interaction time of the desired operators involved in the realization and can be represented by action or non-action of Pauli X operators between selected idling times.
Furthermore, the authors study the impact of the connectivity amongst the qubit network. In the case of full connectivity of qubits, the digital-analog quantum device is shown to be inefficient for the implementation of the fermionic SWAP network as the circuit depth scales as O(n2), where n is the number of qubits. For spinless fermions the optimal topology is found to be a 1-dimensional chain, and for spin-1/2 fermions the optimal topology is found to be a ladder. While searching for the optimal topology, the simulation of the single Trotter step of the evolution requires O(n) applications of multiqubit gates. In terms of the refocusing technique, it is shown that the circuit depth also increases by a factor of O(n).
The work also analyzes the errors occurring during the determination of interaction constants and shows that these errors leads to the weak quadratic growth of infidelity as a function of the deviation of the actual coupling constants from the assumed values. While this error has a positive impact on the digital-analog approach, the depolarizing noise on the other hand leads to the linear decrease of fidelity as a function of error probability. Hence, the depolarizing noise poses severe challenges in the implementation of the digital-analog simulation of fermionic systems.
Such a hybrid digital-analog scheme is an interesting attempt to perform quantum computation, while avoiding the two- and multi-qubit gates in general that suffer from low fidelities due to manufacturing issues in current hardware. Although this is presented as a viable model of computation, there are still many issues and trade-offs that need to be resolved. However, as pointed out in this work such a model of computation can have many benefits when specific problems are addressed, such as the simulation of fermionic systems of many dimensions since all qubits in the chip can be used uniformly in time.